home *** CD-ROM | disk | FTP | other *** search
- INITIAL SETUP INSTRUCTIONS
- ==========================
-
- 1. Your CONFIG.SYS file must contain values that are equal
- to or greater than the following:
-
- FILES = 20
- BUFFERS = 20
-
- 2. Create a directory under the root directory called UMM
- (or any other appropriate name).
-
- Example: "MD \UMM" <ENTER>
-
- 3. Change to the directory you created.
-
- Example: "CD \UMM" <ENTER>
-
- 4. Copy the self-extracting program UMM11.EXE.
-
- Example: "COPY A:UMM11.EXE" <ENTER>
- (Assuming UMM11.EXE is located on
- floppy diskette a:)
-
- 5. Execute the installation program UMM11.EXE.
-
- Example: "UMM11" <ENTER>
-
- 6. When prompted with "Continue With Installation Y/N?"
- answer "Y"
-
- Example: "Y" <ENTER>
-
- 7. To run the software, execute UMM.
-
- Example: "UMM" <ENTER>